It’s been a while since I made a catch all tray! I used to make a ton of these! Made this custom catch all trays out of black limba and added the finishing touches on the laser. #woodworking #diy #catchall #woodworker | Two Moose Design
0:23
It’s been a while since I made a catch all tray! I used to make a ton of these! Made this custom catch all trays out of black limba and added the finishing touches on the laser. #woodworking #diy #catchall #woodworker | Two Moose Design
9.2K viewsAug 17, 2023
FacebookTwo Moose Design
Currently working on a set of custom catch all boxes for files 🤌🏼 almost nailed this one first try. I just needed to know the perimeters for a tight fit and a snug fit for the magnets. #woodworking #cnc #cncmachining #diy | Two Moose Design
0:35
Currently working on a set of custom catch all boxes for files 🤌🏼 almost nailed this one first try. I just needed to know the perimeters for a tight fit and a snug fit for the magnets. #woodworking #cnc #cncmachining #diy | Two Moose Design
11K viewsAug 29, 2023
FacebookTwo Moose Design
I need to make another one of these 😍this was such a pretty cutting board with multiple wood species to create the color. | Two Moose Design
0:36
I need to make another one of these 😍this was such a pretty cutting board with multiple wood species to create the color. | Two Moose Design
47.3K views6 months ago
FacebookTwo Moose Design
In this video I make an inlay end grain cutting board using a cnc. #woodworking #woodworkingtips #cuttingboard | Two Moose Design
3:28
In this video I make an inlay end grain cutting board using a cnc. #woodworking #woodworkingtips #cuttingboard | Two Moose Design
942.6K viewsSep 11, 2023
FacebookTwo Moose Design
Check out this cutting board! | Two Moose Design
3:01
Check out this cutting board! | Two Moose Design
2.7K viewsSep 12, 2023
FacebookTwo Moose Design
What design should I do next? Custom inlay end grain cutting board! #woodworking #diy #woodworker #maker #tools #cuttingboard | Two Moose Design
0:22
What design should I do next? Custom inlay end grain cutting board! #woodworking #diy #woodworker #maker #tools #cuttingboard | Two Moose Design
682.3K viewsSep 14, 2023
FacebookTwo Moose Design
What do you think of this woodworking tip? | Two Moose Design
0:27
What do you think of this woodworking tip? | Two Moose Design
6.6K views11 months ago
FacebookTwo Moose Design
3:01
Full length video showing the cherry and walnut inlay cutting board | Two Moose Design
3.4K viewsJan 27, 2024
FacebookTwo Moose Design
0:29
Hopefully….I can get two more batches out before the holidays! Working on a youtube video now and once I finish that I’ll slam right into the next batch of cuttings boards. This our newer design and has been pretty popular! Mostly in walnut, I’ve done a few in maple. #woodworking #cuttingboard #cnc | Two Moose Design
387.8K views6 months ago
FacebookTwo Moose Design
0:28
People are loving the new refreshed design! We made 3 walnut boards and one maple in this design in this batch of boards. We’ve been pretty busy the last month or so, I’ve been really trying to get ahead before the holidays since I get my butt whoooooped pretty much every year. But this year I’m not going to procrastinate and get ahead! If you are looking to order the window is closing fast for orders making it by Christmas! #cuttingboard #woodworking #cnc | Two Moose Design
407.1K views6 months ago
FacebookTwo Moose Design
2:03
Custom Inlay cutting board. Cutting board made by hand and inlay done by a cnc. Walnut was used for the board and maple used for the inlay. #woodworking #cnc #diy #cuttingboard | Two Moose Design
481.9K viewsSep 21, 2023
FacebookTwo Moose Design
0:25
Custom end grain cutting board for a wedding gift! | Two Moose Design
35.9K viewsDec 23, 2024
FacebookTwo Moose Design
0:32
That maple 😮‍💨 custom board we did a while back, nice simple lower third design. This board was 20x16! | Two Moose Design
98.8K viewsJan 26, 2025
FacebookTwo Moose Design
2:36
Custom Inlaid cutting board using 6 different types of wood. | Two Moose Design
52.4K viewsApr 27, 2024
FacebookTwo Moose Design
0:33
Tried something a little different on this one! I think the groove around the outside adds a nice touch and also makes it easier to pick up! Fill it full of @titebondproducts then cut off the plug and then comes a bunch of sanding 😮‍💨😮‍💨 This board is made from cherry with a walnut inlay, and is 15” x 2.25” thick. #woodworking #cnc #cuttingboard #kitchendecor | Two Moose Design
9.1K viewsDec 26, 2023
FacebookTwo Moose Design
0:22
These little details always amaze me! The walnut and maple carve so well! We’re getting ready to start another batch of boards tomorrow 🙌🏼 #woodworking #cuttingboard | Two Moose Design
213.5K views6 months ago
FacebookTwo Moose Design
0:30
Magic?! Nahhh it’s just some cotton cloth glued to the back 😆 | Two Moose Design
17.8K viewsJan 1, 2025
FacebookTwo Moose Design
0:25
I’m digging the lower 1/3 inlays! They are smaller and don’t take quite as long so I can sell them cheaper than my more time consuming cutting boards. What should I inlay next 🤔 #woodworking #cuttingboard #chef #chefknife #cnc | Two Moose Design
990.6K viewsApr 21, 2024
FacebookTwo Moose Design
0:15
What’s going on here?! Have you ever seen a tiddy handle before 😆 #woodworking #carpentry #tools #woodworker | Two Moose Design
1.7M viewsJul 15, 2023
FacebookTwo Moose Design
0:13
Putting the finishing touches on this mallet! #woodworking #mallet #carpentry #diy #wood | Two Moose Design
4K viewsJan 2, 2025
FacebookTwo Moose Design
0:26
A few more of these jumbo bane boards! These things were 26”x18” and heavvvy. I need to make a new board for ourselves, I’ve been using the same basic cutting board for daily use that I made when we started woodworking. I make all these inlay boards and don’t have one for myself 😆 how does that saying go? A plumbers house is never plumbed? | Two Moose Design
24.1K viewsJan 31, 2025
FacebookTwo Moose Design
0:14
Walnut and maple inlay cutting board! Every chef needs one! #woodworking #woodworker #cuttingboard #chef | Two Moose Design
4.9K viewsApr 12, 2024
FacebookTwo Moose Design
0:24
Here’s another one of our illusion boards! Would you use something like this or would it make you dizzy? 😵‍💫 this board is 15” with a maple base and walnut inlay. #woodworking #cuttingboard #cnc | Two Moose Design
244.5K views11 months ago
FacebookTwo Moose Design
0:19
Fresh off the cnc! Little but if sanding and some food safe oil and it’s ready to go! #woodworking #tools #cnc | Two Moose Design
78.9K viewsOct 11, 2023
FacebookTwo Moose Design
0:19
Mini cutting boards?! Not really this will be part of an inlay cutting board! Half goes into the board the other half cuts cut flush! #woodworking #cuttingboard #diy #endgrain #tools | Two Moose Design
12.2K viewsSep 12, 2023
FacebookTwo Moose Design
1:09
What’s the anchor stand for? I’ve heard many explanations! The person this board went to wasn’t in the military but loved what it symbolized | Two Moose Design
28.5K viewsJan 1, 2025
FacebookTwo Moose Design
0:11
Have you tried this trick before? I do this every time I glue a large box like this! Letting the glue harden up for about an hour is key! If it’s still wet it will make a mess. After I remove the tape I run a dull chisel along the inside to take care of anything left behind! #woodworking #woodwokringtips #diytips #tips | Two Moose Design
25.3K viewsOct 26, 2022
FacebookTwo Moose Design
0:59
Theeee ole tape trick! This piece didn’t have traditional pulls so I couldn’t just drill holes from the front to help with attachment. Little bit of “double sided tape” and we’re in business! Yes the tape comes off before finishing 😆 I also know about the thing called accelerator it’s not needed in most situations 😁😁😁 #woodworking #woodworkingtips #diytips #carpentry | Two Moose Design
91.7K viewsNov 5, 2022
FacebookTwo Moose Design
0:17
Cutting it close on these cnc wooden trivets! Using every inch of wood on this one 😆 someone will still tell me I’m wasting wood 😉 #woodworking #cnc #diy #woodworker | Two Moose Design
17.1K viewsNov 23, 2023
FacebookTwo Moose Design
0:21
It’s so satisfying watching these cutting boards come to life! #woodworking #woodworker #cnc #cuttingboard | Two Moose Design
127.5K views8 months ago
FacebookTwo Moose Design
See more